120
10.3 ASSEMBLY INSTRUCTIONS - CONTINUED
CHAPTER 10: BIKE SPECIFICATIONS AND ASSEMBLY GUIDE
STEP 2
A Open BLACK HARDWARE BAG.
B Attach the REAR FRAME HANDLE (3) to
the MAIN FRAME (2) using 2 BOLTS (C).
C Attach the REAR FRAME COVER (4) to
the MAIN FRAME (2) using 2 BOLTS (D).
BLACK HARDWARE BAG
PART TYPE DESCRIPTION QTY
C SOCKET HEAD BOLT M8X20L 2
D PHILLIP HEAD BOLT M5X12L 2
RED HARDWARE BAGS
PART TYPE DESCRIPTION QTY
C SOCKET HEAD BOLT M8X20L 4
E TOOTH WASHER 4
D Carefully pull the CONSOLE CABLES (5)
through the CONSOLE MAST (6) using
the twist tie located inside the CONSOLE
MAST (6).
E Attach CONSOLE MAST (6) to MAIN
FRAME (2) using 4 BOLTS (C) and 4
TOOTH WASHERS (E).
To Next Page
Loading...
