Matrix r7xi-02 - Page 132

129
10.5 TV PROGRAMMING INSTRUCTIONS (US) - CONTINUED
Auto Tuning (continued):
7. The achieved scan will be displayed on the bottom left hand corner of the screen (Figure G). Once the channel scan is complete, the
scanned channels will be displayed on the channel list on the screen (Figure H). The scan process is now complete if using a non-Analog signal
source.
8. Select the Analog source on the screen (Figure I). Select your country location (Figure J).
9. Select the signal delivery type on the screen (Figure K). Select the tuner type on the screen (Figure L).
FIGURE JFIGURE I
FIGURE HFIGURE G
CHAPTER 10: BIKE SPECIFICATIONS AND ASSEMBLY GUIDE
FIGURE LFIGURE K