53 Matrix SATATYA PARAM NVR Quick Start
“Management Server”
“Recording Server”
Management Server
For the Recording Server (RS) to communicate with the Management Server (MS), a connection
between them needs to be established by configuring the MS IP Address and Port in the RS-
Manager. But it is not necessary that both the components are located in same network (private),
they may be located in two different networks (public). Hence, SAMAS allows to configure 3
Preferred Networks where you can add private network as well as public network of MS.
Expand the Management Server panel as shown below to configure parameters for Preferred
Network 1 (PN1), Preferred Network 2(PN2) and Preferred Network 3 (PN3).
• IP Address or Server Name: Enter either the Private or Public IP address of Management
Server or enter Host Name, Domain Name or Server Name of ISP1 and ISP2.
• Port: Enter either Private or Public Port.
To Next Page
Loading...
