17
18
If you forget the IP address or login credentials of camera then the
camera can be reset to factory default settings using the reset switch.
Ÿ The Reset switch is located as shown in Figure 11a. Press the Reset
switch for minimum 5 sec and release the switch to reset the camera
to default settings.
Step 7: Accessing the Reset Switch and SD Card Slot
Figure 11a
Ÿ You can insert the SD card in the slot to store your camera recordings,
see Figure 11b.
Step 8: Mount the Camera
• Align the Top Enclosure with Bottom Enclosure.
• Affix Top Enclosure with the Bottom Enclosure and tighten the
Retainer screws using the Allen Key, see Figure 12.
• The Top and Bottom Enclosures are affixed together, see
Figure 13.
Figure 11b
To Next Page
Loading...
