92 Appendix C: Matrox Imaging operating system utilities and recovery
3. Inside the terminal window, go to the /opt/BIOS folder using the following
commands:
Note that MIOS is case-sensitive.
4. Start the BIOS update application using the following command:
where you should replace <BIOSVERSION> with the new BIOS version (for
example, IrisGTX_100002.bin). The BIOS update starts after a 10-second delay.
Once the BIOS update begins, information will appear on your local display.
5. When the BIOS update completes, you will be prompted to reboot Matrox
Iris GTX. Changes made will not take effect until you reboot.
cd /opt
cd BIOS
sudo ./IRISGTX_<BIOSVERSION>.bin
To Next Page
Loading...
