MATSONIC MS6380SG - J6 - Infrared Connector; FAN1 - CPU Fan Power Connector

15
Hardware Configuration
J6
FAN1
1
Chipset
Chipset
I/O
J6
FAN1
5V 1
NC 2
IRRX 3
GND 4
IRTX 5
J6 – Infrared Connector
The mainboard provides a 5-pin Infrared connector for
infrared devices. You must configure the setting for infrared
device through the Peripheral Setup in BIOS Setup section.
FAN1 – CPU Fan Power Connector
Connect CPU fan cable to this connector.
GND +12V Sensor