MATSONIC MS6380SG - Power Management Setup

BIOS Setup 31
Power Management Setup
Choosing the item from BIOS Setup main menu.
Power Management/APM Disabled
Green Monitor Power State Suspend
Video Power Down Mode Stand By
Hard Disk Power Down Mode Suspend
Standby Time Out (Minute) Disabled
Suspend Time Out (Minute) Disabled
Modem Use IRQ N/A
Display Activity Ignore
IRQ3 Monitor
IRQ4 Monitor
IRQ5 Ignore
IRQ7 Ignore
IRQ9 Ignore
IRQ10 Ignore
IRQ11 Ignore
IRQ13 Ignore
IRQ14 Monitor
IRQ15 Monitor
LAN Card Power On Disabled
Ring On Power On Disabled
ESC : Quit ↑ ↓ → ←: Select Item
F1 : Help PU/PD/+/– : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
AMIBIOS SETUP - POWER MANAGEMENT SETUP
(C)1998 American Megatrends, Inc. All Rights Reserved
Power Management/
APM
Set this option to enable power
management features and APM
(Advanced Power Management).
Green Monitor
Power State
This option specifies the power state that
the green PC-compliant video monitor
enters when AMIBIOS places it in a power
savings state after the specified period of
display inactivity has expired.
Video Power Down
Mode
This option specifies the power conserving
state that the VESA VGA video subsystem
enters after the specified period of display
inactivity has expired.
Hard Disk Power
Down Mode
This option specifies the power conserving
state that the hard disk drive enters after
the specified period of hard drive inactivity
has expired.