Chapter 2
20
1. Before you install the PCI Sound drivers, make sure
your Operating System has been installed, otherwise the
PCI Sound Pro might be detect as "Other Device" by the
device manager of your OS.
2. After the drivers install, if you wants to use Software
Wave-Table drivers as MIDI output device, select
MULTIMEDIA icon within CONTROL PANEL. Select
MIDI page, and click on "C-media SoftMidi
Synthesis(Win98)/Driver(Win95)" then click "OK" to
confirm.
3. A Windows application named Audio Rack is provided
within PCI Sound drivers, which gives you control
over all audio functions through a user interface as
simple to use a home stereo system, we recommended
you to use the System Mixer within Audio Rack to
control the volume, recording device select and recording
gain.
4. If you using devices that use Midi port as the control
interface, you need to select MULTIMEDIA icon within
CONTROL PANEL. Select MIDI page, and click on
"CM8338 MPU-401"(Win98) or "CMI8338/C3DX PCI
Audio External MIDI port"(Win95) then click "OK" to
confirm.
5. See details of PCI Sound manual within the CD
attached with the mainboard.
Notice for PCI Sound application
To Next Page