EasyManua.ls Logo

MATSONIC MS8127C - Frequency Control Option

Default Icon
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65
Frequency Control Option
This item enables you to set the clock speed and system bus for
your system. The clock speed and system bus are determined
by the kind of processor you have installed in your system.
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Frequency Control
Item Help
Auto Detect DIMM/PCI Clk Disabled
CPU Host/PCI Clock Default
Menu Level
: Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Auto Detect DIMM/PCI Clk Default: Disabled
When this item is enabled, BIOS will disable the clock signal of free
DIMM and PCI slots.
CPU Host/PCI Clock
These items appear if you have set the CPU Internal Core Speed to
Manual. Use the CPU/DIMM/PCI Clock to set the system bus frequency
for the installed processor (usually 133 MHz, 100 MHz or 66 MHz).

Table of Contents

Related product manuals