BLADE
1-1
TI215G0010
General information
SYMBOLS IN THE MANUAL
In this manual some symbols are used that to attract
the reader’s attention and underline some particularly
important aspects of the treatment.
Danger
It indicates a danger with the risk for accident,
even fatal, for the user. Pay careful attention to
text block with this symbol.
!
Warning
It warns against a possible deterioration of the
m hine or personal item of the user.
F
Notice
It shows either a notice or a note on the key
functions or useful information.
Further information
This symbol introduces text blocks containing
further information. This information has no
direct relationship with the description of a
function or with procedure development.They
could be cross-references to other documents
or other sections of this manual.
The table below gives the list and describes the meaning
of the dierent symbols used.
Damage risk
It indicates a high damage risk of a piece, for
example, using a wrong tool or by mounting
something with the incorrect procedure.
Visual check
It recommends the reader to carry out a visual
check. This symbol can also be found in the
instructions for use. The user is required to
read a measure value, to check some warning
signs, etc.
Acoustic check
It recommends the reader to carry out a sound
acoustic check. This symbol can also be found
in theinstructions for use. The user is required
to listen to an operational noise.
To Next Page
Loading...
Need help?
General
