BLADE
1-3
TI215G0010
General information
REQUIRED QUALIFICATIONS FOR OPERATORS
The operator in charge of the operation or the
maintenance of the machine should have all the
professional requirements specic to each foreseen
operation. The operator should be trained and aware of
his responsibilities.
Below is the description of the professional proles
concerning the operators in charge of the machine.
Entry level machine operator
(Qualication 1)
Qualied sta able to carry out simple
tasks, i.e. to operate the machine with the
use of controls on the push-button, and
to carry out typical simple functions of
adjustments, start or stop.
Second level machine operator
(Qualication 2)
Qualied sta able to carry out the
task of qualication 1 and also to
operate the machine with disconnected
safety protections to perform specic
adjustments, start or stop functions.
F
IMPORTANT
This qualication includes those responsibilities
typically subdivided into two separate
qualications. For the operator in charge of our
machines, a specialization course is held to train
the operator to be able to perform all of the
actions necessary to operate the machine even
with some of the protections disconnected.
However, this requires a certain competence by
the operator and extreme care by the manager
of the factory so that the said operator carries
out only the established operations.
Mechanical Service Engineer
A qualied engineer able to operate the
machine under normal conditions, to
operate it with disconnected protections,
to intervene on mechanical parts to carry
out all adjustments, carry out maintenance
and all of the necessary repairs. This person
is not empowered to carry out interventions
on electrical systems with live voltage.
Electrical Service Engineer
A qualied engineer able to operate the
machine under normal conditions, to
operate it with disconnected protections.
He/she is in charge of all electrical
adjustments, maintenance and repair. He/
she is able to operate with live voltage
inside cabins and shunt boxes.
The Manufacturer’s Engineer
A qualied engineer from the manufacturer
to perform complex operations in special
situations or according to that which has
been agreed upon with the user.
To Next Page
Loading...
Need help?
General
