BLADE
2-3
TI215G0010
General Information - Safety
– In case of oil additions, use the same type as the
one already contained in the machine. Mixtures
are noxious for the life span of both the oil and the
compressor;
– After any maintenance, start the machine and check
that all the devices for control, stop or alarm work
correctly. Verify also that temperature and pressure
values are those foreseen;
– Make the checks and the revisions as foreseen by this
manual, using only original spare parts. Not making
these checks or using non-original parts may cause
problems that jeopardize the correct operation
of the machine and cause the forfeiture of the
manufacturer’s warranty.
RESPONSIBILITY
Ing. Enea MATTEI S.p.A. disclaims all responsibility for
injuries to people, or damages to things and animals, if
caused by:
– non-observance of the said precautions;
– improper use of the compressed air or the machine
in general;
– non-observance of ordinary safety rules or domestic
rules in the work place;
– non-observance of instructions during handling and
transportation of the machine;
– incorrect installation of the machine;
– defects due to the power supply line;
– absence of regular maintenance;
– unauthorized changes or intervention;
– use of non-original spare parts or not explicitly for
the model;
– non-observance, even if only partial, of the
instructions;
– possible ineciency caused by the non-use or the
malfunction of the compressor.
WARNING !!!
It is recommended to use compressed air,
directly output from compressors, only for
production processes. For any other use,
FIRST and ALWAYS contact the distributor,
the technical service or the manufacturer.
DESCRIPTION OF PICTOGRAMS
Some pictograms have been applied to the machine
to symbolize such situations as of danger, obligation,
prohibition and special indications (e.g: rotation
direction of the fan etc.)
Many accidents are often caused by the non-observance
of the simplest safety rules or the lack of knowledge of
the instructions given by the manufacturer.
To avoid possible dangerous situations, some of them
have been highlighted with special signs represented
by suitable and normalized symbols (pictograms).
Below is the list of some of the most common symbols
and applied to our machines:
PICTOGRAMS OF DANGER
These are triangular signs, with a black outer band on a
yellow background and with the black symbol.
Warning!
Container under pressure
Warning!
Risk of electrical shock
Warning!
The machine is either controlled at distance
or by an automatic system and can start
without warning
Warning!
Risk of surface at high temperature (>70°C)
Warning!
Air exhaust
To Next Page
Loading...
Need help?
General
