Max P Series - P215 Specifications

P-Series User Manual Rev2022 18
Specications
P215 SPECIFICATIONS
Flow Range 25 cc/min to 35 liters/min
Accuracy (3 cP) ± 0.2% of reading over a 200:1 range
Maximum Operating Pressure 3000 psi (210 bar)
Weight 10.4 kg
Recommended Filtration 10 micron
Port Size(s) 1/2 inch NPT or #8 SAE
Fluids Most non-aqueous, hydrocarbon based uids
MATERIALS OF CONSTRUCTION
External Stainless steel, type 303
Wetted Stainless steel, type 303, 440C, 17-4
O-Rings Standard: Viton®
Optional: Teon®, Peruoroelastmer, Neoprene
FREQUENCY TRANSMITTER
Output Signal Standard: 5 Vdc, single phase
Optional: Quadrature 5 Vdc, two phase
Current sinking, 20 mA max., single phase
K-Factor Single Phase: 20,000 pulses/L
Two Phase: 40,000 pulses/L, 4x decoded
(10,000 pulses/L/phase, 1x decoded)
Power Supply Requirements 5-26 Vdc @ 30ma
Ambient Operational Range -40°C to 80°C, Single piece - Two piece to 110°C
Metered Liquid Temp Range -40°C to 90°C, Standard model
(based on 20° ambient) -40°C to 225°C, Two piece, ultra high temperature model
Compliance CE Certied, Ex-proof version available with ATEX/IECEx II 2 G Ex
db IIB Tx Gb as well as UL, cUL certication for Class 1, Division 1,
Groups C and D, Tx
ANALOG TRANSMITTER
Output Signal Any range of ± 10V or ± 20mA linearized and damped
with anti-dither protection
Power Supply Requirements 12Vdc @ 90 mA, 24Vdc @ 45 mA
Ambient Operational Range -40°C to 80°C, Single piece - Two piece to 110°C
Metered Liquid Temp Range -40°C to 90°C, Standard model
(based on 20° ambient) -40°C to 225°C, Two piece, ultra high temperature model
Compliance CE Certied, Ex-proof version available with ATEX/IECEx II 2 G Ex
db IIB Tx Gb as well as UL, cUL certication for Class 1, Division 1,
Groups C and D, Tx