i-32V5
18
I/O resource - Parameter VALUE
H10
0 (default) Funcon disabled
1
Funcon acve in and mode.
The remote on-o funcon does not disable DHW producon.
2
Funcon acve in and mode.
The remote on-o funcon disables DHW producon.
3
Funcon acve in mode.
The remote on-o funcon does not disable DHW producon.
4
Funcon acve in mode.
The remote on-o funcon disables DHW producon.
5
Funcon acve in mode.
The remote on-o funcon does not disable DHW producon.
6
Funcon acve in mode.
The remote on-o funcon disables DHW producon.
6 DHW temperature probe enabling
6 DHW valve control
PRG->Set->SAN) the ma-
-
NOTE:
H10
H10
MEMORISING THE PROBE IN HEATING MODE
•
• b06
HEATING MODE ON DHW STORAGE TANK
H130=1
When H130=1r10=1 e r15=2r15
INSUFFICIENT HEAT EXCHANGE IN A DHW SYSTEM
-
ON/OFF
E00
H47=2).
I/O Resource- Parameter
ID3 can be acvated via H47 Enables remote On /O funcon