MAXA i-MAX 0475 - Heat Pump Lockout Alert

i-MAX Industrial inverter air/water heat pump with axial fans
33
13.16.1 HEAT PUMP LOCKOUT ALERT
The alarm will surge immedialtely in the below cases and once the corresponding conditions are fulfilled:
Alarm
Recovery condition
Permanence condition
E001
Manual
-
E002
Manual
-
E005
Manual
-
E006
Manual
-
E008
Manual
-
E018
Automatic
-
E041
Manual
-
E101
Automatic
-
E102
Automatic
-
Sensor errors
Automatic
-
E801 – E803
Automatic
-
E851-E853
Automatic
All compressors are off for at least # 180 sec
E861-E863
Automatic
All compressors are off for at least # 180 sec
E871-E873
Automatic
All compressors are off for at least # 180 sec
E881-E883
Automatic
All compressors are off for at least # 180 sec
E891-E893
Automatic
All compressors are off for at least # 180 sec
E901-E903
Automatic
All compressors are off for at least # 180 sec
E911-E913
Automatic
All compressors are off for at least # 180 sec
E921-E923
Automatic
All compressors are off for at least # 180 sec
E931-E933
Automatic
All compressors are off for at least # 180 sec
E941-E943
Automatic
All compressors are off for at least # 180 sec
E951-E953
Automatic
All compressors are off for at least # 180 sec
E961-E963
Automatic
All compressors are off for at least # 180 sec
E971-E973
Automatic
All compressors are off for at least # 180 sec
For multi-circuit units, the above conditions are valid only for a single circuit. The appliance in its totality is malfunctioning (and on
the circuit 1, the lockout relay will be activated) if:
1) All circuits are in lockout conditions because of the alarms indicated above.
2) Or at least one of the following conditions is fulfilled on the main circuit:
Alarm
Recovery condition
Notes
E005
Manual
-
E006
Manual
-
E018
Automatic
-
E041
Manual
-
E101
Automatic
-
E102
Automatic
-
Sensor error
Automatic
Valid only for outlet temperature and utilities (users) intake sensors