WARNING – Death or injury can result from unexpected
movement.
Protect against unexpected movement by removing electrical
power from the Fife-200 Web Guiding System and the machine
into which the Fife-200 Web Guiding Systemis installed.
WARNING – Danger of injury from crushing.
Maintenance and repair tasks on the Fife-200 Web Guiding
System must be performed only when the machine has been
stopped and has been secured from being turned on again.
WARNING – To prevent death or injury, always use standard
Lockout/Tagout procedures.
- Maintenance schedules are recommended intervals only.
Ambient conditions can influence intervals considerably.
Therefore, adjustments to the recommendations must be
made accordingly.
- The motor of the Fife-200 guide requires no maintenance.
- Sensors shall be cleaned as necessary in order to ensure
lenses, transmitters, and/or receivers have a clear path to
detect the web. Cleaning shall consist of wiping down
components as necessary with a clean and dry cloth.
- Operator Interface (touchscreen) should be cleaned as
necessary in order to ensure clear visibility of the menus.
Cleaning shall consist of wiping down components as
necessary with a clean and dry cloth. Commercial liquid
cleaner may be used if necessary, but ensure that a small
amount of liquid is placed on the cloth before wiping down
the screen. Do not directly spray the screen. Compressed air
or a shop vacuum may also be used as necessary.
To Next Page
Loading...
