TECHNICAL DATA 9 - 3
DSE-17www.maxcess.eu MI 1064 1 C
TechnDaten.fm
Absorption thresholds
Opaque materials: 30% … 50%
"Cloudy" fleece materials: 20% … 40%
Transparent films: 15% … 20%
The absorption thresholds listed here are based on experience.
Characteristic values Characteristic values of measurement deviations for opaque,
homogeneous materials
* The sensor calibration was performed in the installation
position.
** from 10°C to 40°C
*** The calibration of the web guide controller was performed
at operation temperature.
Resolution of the analog signals
12-bit resolution for 20mA
11-bit resolution for 10mA
Characteristic
values
Sensor variant
mm
DSE-17-160 DSE-17-300 DSE-17-420
Linearity* ±0.80% ±0.43% ±0.30%
Web plane change: ±0.31% ±0.17% ±0.12%
Temperature
change**
±0.10% ±0.10% ±0.10%
Analog signal
transfer***
±0.40% ±0.40% ±0.40%
To Next Page
Loading...
