by the application) or “Energy saving mode” (only when the phone
is active).
16.5.5 Network Selection
The telephone automatically searches for a network. If you want to
do it manually, press „OK”-> „Manual” and select a provider.
16.6 Restore Factory Settings
To restore the phone to factory setting, enter the phone lock code
(default 1234), and select „Yes” to reset setting and reset the phone.
17 FAQ (TROUBLESHOOTING)
Only qualified service workers are authorized to repair your
phone. Unauthorized repair and modifications void the
Manufacturer’s warranty!
Make sure the number you are dialing is correct. If
you make an international phone call, dial a
country code before the actual number (eg. 0049
or +49 for Germany).
If you have a prepaid card, make sure there are
sufficient funds available on the card to place a
phone call.
To Next Page
Loading...
