Maxcom MM320 User Manual

52
15.6.2 Telephone Security
You can enable blocking of the phone. Every time you
switch on the phone, you will have to enter the phone
security code. Default code is 0000.
Restore Factory Settings 15.7
This option allows you to restore phone factory settings.
In MENU select:
Settings->Restore Fact. Sett., and then enter the
security code. Press the green receiver key to confirm.
16. PC Connections
You can connect the phone to a computer via a USB
cable, and you can copy and transfer files from/to the
phone and to/from the computer.
To connect:
- plug in the USB cable into the phone
- plug in the other end of the cable into the USB port on
the computer.
- Messages “Mass Storage Device” and “COM Port” will
appear on the display. Select Mass Storage Device.
17. FAQ (Troubleshooting)
Only qualified service is authorized to repair your
phone. Unauthorized repair and modifications void the
Manufacturer’s warranty!
Warning: Default phone security is: 0000

Maxcom MM320 Specifications

General

Display diagonal	3.2 \
Display resolution	240 x 320 pixels
Data network	GSM
SIM card capability	Single SIM
2G bands (primary SIM)	900, 1800 MHz
Mobile network generation	2G
Flash card support	Yes
Compatible memory cards	-
Maximum memory card size	32 GB
Talk time (2G)	5 h
Battery capacity	1000 mAh
Standby time (2G)	300 h
Form factor	Bar
Personal info management (PIM)	Alarm clock, Calculator, Calendar
Rear camera resolution (numeric)	2 MP
Cables included	USB
Multimedia Messaging Service (MMS)	Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Type	Feature phone
Product color	White

Weight and Dimensions

Depth	11 mm
Width	58 mm
Height	129 mm
Weight	110 g