Maxell SSB-3WB - Basic Operation; Turn On;Off; Select Sources

10
Turn On/Off
Turning the System ON/OFF
Either,
1) Press the button on the unit; or
2) Press the ON/OFF button on the remote
control.
Note:
When turning the system on, the system will
continue in the mode was set last time.
Note:
Be sure to unplug the power cord from the
outlet when the system is not in use for an
extended period of time.
POWER light indicator:
POWER
Of
f
RED
On
A
mber
The unit will switch to standby mode when
the audio cables are disconnected or
when you turn off TV/external device after
several minutes.
Select Sources
BLUETOOTH
Either,
1) Press BT/PAIR button on the remote control;
or
2)
button on the unit,
will allow you to select Bluetooth source.
BLUTTOOTH
On
Of
f
Blue
Optical/ARC
Either,
1) Press Optical button on the remote
control; or
2)
button on the unit,
will allow you to select Optical source
input for watching broadcasting TV
program.
OPTICAL light indicator:
OPTICAL
On
Of
f
A
mber
RCA/LINE IN
Either,
1) Press RCA/LINE IN button on the remote
control; or
2)
button on the unit,
will allow you to select RCA or LINE IN source.
RCA/LINE IN light indicator:
RCA/LINE IN
RCA
LINE IN
A
mber
White
Adjust Volume Level
Either,
1) Press the VOL +/- button on the remote
control; or
2) Press / button on the unit,
to increase or decrease the volume level.
If the unit is connected to the TV headphone
jack, you can control the Volume Level
using the TV remote control.
Mute Sound
Press the MUTE button on the remote
control to mute. Press this button again or
VOL+/VOL- buttons on the remote control
or on the unit to resume the sound. The
light indicator on the unit will blink until
sound resumes.
Bass Boost
Either,
1) Press BASS/SRS button on the remote
control; or
2) Press
button on the unit,
to turn on the bass. Press this button again
to switch to level 2 or to turn it off.
Basic Operation