9
Getting to Know Your Display
Status LED
Not Illuminated - No AC Power detected
If the main power switch (rear of panel) is turned off,
this LED will not illuminate.
Orange - Standby (Power OFF) with AC power
detected
The LED will illuminate in orange color if the monitor
is shut-off but the main power cord is plugged into
the back of the unit.
Flashing/Solid Green
The LED will flash green for approximately 3
seconds before turning solid green. This is to
indicate the display is powering up prior to
displaying full picture.
Power (Standby) Button
Turns power on/off from standby mode. There is a
wait period between on/off cycles.
Volume Adjustment Buttons
Use these buttons to adjust volume up and down.
These keys also serve as navigation and adjust-
ment keys when On Screen Display menu is
engaged.
Select Buttons
Use these buttons to navigate through the the On
Screen Display menu.
Menu Button
Use this button to engage the On Screen Display
menu.
Input Button
Use this button to switch between available inputs.
Front Panel Controls
To Next Page
Loading...
Need help?
General