02
Thank you for choosing MAXHUB product.
Please read this document carefully and thoroughly before using the product. Should you have any
technical questions, please contact MAXHUB technical support.
Safety Warnings
Placement
1. Should be NOT expose the product to direct sunlight or heat source.
2. Please do NOT place the product on a slope, mount on an unstable stand or an insufficiently.
3. Please do NOT put the product near devices that generate strong magnetic fields.
4. Please do NOT place any heavy objects on the product.
5. Please do NOT place the product in a humid environment for it is NOT water-proof. Keep it from
water splashes.
Power
1. Please check the product’s operating voltage and frequency to ensure they match the local power
configuration.
2. Please unplug the device during thunderstorms.
3. Please unplug the power cable if the product will not be used for an extended period.
4. Please do NOT physically or mechanically damage the power cable.
5. Please use the MAXHUB cable and do NOT modify it.
6. Please make sure the AC is grounded.
Screen
1. Please do NOT use hard or sharp objects on the screen other than the MAXHUB stylus.
2. Please unplug the power before cleaning the product. Use a soft, dustless, and dry cloth to clean the
screen.
3. Please do NOT use water or liquid detergent to clean the product.
4. Please contact the authorized reseller for thorough cleaning.
5. Please do NOT display a high-brightness image on the screen for a long period of time.
Viewing Distance
The optimal viewing distance is 3-4 times the diagonal length of the screen.
Temperature & Humidity
1. Please do NOT place the product near a heater or radioactive source.
2. If the product is moved from a cold environment to a warm one, please unplug the power cable
and allow the product to gradually warm up for at least two hours to reduce moisture.
3. Operating temperature of the product is 0°C – 40°C. Operating humidity is between 0% - 90%RH.
To Next Page
Loading...
