What to do if my Maximum S-2000 FTA PVR Receiver screen shows 'No Signal'?
If your Maximum Receiver displays a 'No Signal' message, it could be due to the DVB-S cable not being properly connected. Ensure the DVB-S cable is securely connected. Another potential cause is incorrect settings. Verify that you have set up the correct parameters for your receiver.
Safety notes to follow before operating the receiver.
Explains the functions of each button on the remote control.
Provides instructions and diagrams for connecting the receiver to other devices.
Steps to follow for the initial setup and language selection.
How to access and navigate the Program Menu settings.
Configuring satellite parameters like LNB type, power, and DiSEqC.
Configuring PVR settings, including device information and formatting.
How to record programs, view the PVR list, and edit recordings.
Starting and stopping direct recording of programs using the remote control.
Booking program recordings using the Electronic Program Guide.
Viewing recorded programs and selecting them for playback.
Renaming and deleting recorded program files.
Resolving issues related to no picture or no signal reception.
Troubleshooting problems with sound output and remote control operation.
Addressing issues like sudden image stops or mosaic effects.
General| PVR | Yes |
|---|---|
| Video Decoding | MPEG-2, MPEG-4, H.264 |
| Ethernet Port | No |
| HDMI Output | Yes |
| Component Output | Yes |
| Composite Output | Yes |
| RF Output | Yes |
| Weight | 1.2 kg |
| Audio Decoding | MPEG-1, MPEG-2 |
| Video Resolution | 1080p, 1080i, 720p, 576p, 576i, 480p, 480i |
| USB Port | Yes |
To Next Page