11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
PAGE 11
LIFT CYLINDER REPLACEMENT
CHAIN
HOIST
LIFTING
CYLINDER
COLUMN
RUNNER
ASSEMBLY
PIN
PIN
10. Remove the Roll Pin & Pin that
fastens the Rod End of the Lift
Cylinder to the Runner Assembly.
Using a device such as a Chain
Hoist, hold the Lift Cylinder while
removing the upper Roll Pin & Pin.
Remove the Lift Cylinder from the
top of the Column.
VALVE
BLOCK
PRESSURE
COMP. VALVE
ELBOW
11. Remove the Tubing &
Connectors and discard them.
Remove the Elbow from the
Valve Block and replace it with
a new Elbow, #6M x 1/4 NPT
(P/N 260164). Fasten the
Pressure Comp. Valve to the
new Elbow. NOTE: Be sure
the arrow on the Pressure
Comp. Valve is pointing up.
TUBING &
CONNECTORS
To Next Page
Loading...
