Maxon COLUMNLIFT BMR-35 - Page 36

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
PAGE 36
PLATFORM WILL NOT CLOSE
5. Check the “E” Valve, remove
the Valve Coil from the Valve
Cartridge. Using a paper clip,
push on the Plunger inside the
Valve Cartridge. It should move
freely approximately 1/8”. Inspect
O-Ring and wash the Cartridge in
solvent to remove any foreign
substances inside the Cartridge.
If Plunger still does not move
freely (approx. 1/8”), then replace
the Valve Cartridge.
VALVE COIL
VALVE CARTRIDGE
“A” Valve
Folding Port
“M” Valve
Motor Solenoid
“A” Valve
Folding Port
“E” Valve
4-Way Valve
“M” Valve
Motor Solenoid
“E” Valve
4-Way Valve
OLD STYLE PUMP
NEW STYLE PUMP