Web Option
The log message is displayed on this web page. With the Web option,
you can save the output to a local file by clicking the “Save log” button.
Console:
The log message is sent to the console port. To use this function, you
should connect the router’s console port and your PC’s serial port with
the supplied serial cable. To view the logs you can open a terminal
software such as hyper terminal with the following serial port settings:
Baud: 115200 bps
Data bit: 8
Parity: None
Stop bit: 1
Flow control: None
When you configure the serial port settings, press the “call” button and
the router log message will be displayed on the terminal program.
To Next Page
Loading...
Need help?
General
