Maxon GPT-3 - Step 6 - Install Control Switch

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
16
18”
1. Drill one 3/4“ hole and two #21–size holes in the vertical
post on curb side of vehicle body as shown in FIG. 16-1A.
Use template shown in FIG. 16-1B.
VEHICLE BODY
VERTICAL POST
(CURB SIDE)
STEP 6 - INSTALL CONTROL SWITCH
FIG. 16-1A
HOLE DRILLING TEMPLATE
FIG. 16-1B
1-3/4”
7/8”