11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
4
STANDARD LIFTGATE COMPONENTS
PUMP BOX
(SEE TABLE 5-1)
EXTENSION
PLATE
OPENER ASSEMBLY
BRACES
DOCK BUMPER
ANGLES
NOTE: Make sure you have all components and parts before you start installing Liftgate.
Compare parts in the Part Box and each Kit Box with packing list enclosed in each
box. If parts and components are missingor incorrect call:
Maxon Customer Service
Call (800) 227-4116 or
Send e-mail to customersupport@maxonlift.com
Prevent injuries and equipment damage. Before cutting the shipping straps from
the Liftgate, put Liftgate on level ground that will support at least 1500 pounds. Be
careful lifting and moving components (such as Extension Plate) after shipping
straps are removed.
CAUTION
!
TYPICAL LIFTGATE PACKAGED FOR SHIPMENT
FIG. 4-1
MAIN
ASSEMBLY
PARTS BAGS
(SEE TABLE 5-1)
To Next Page
Loading...
