13
POWER ON SWITCH &
INDICATOR LIGHT
FIG. 13-1
ACTIVATING LIFTGATE
1. Apply power to Liftgate by
pushing power switch on the
Liftgate control (FIG. 13-1).
Amber POWER ON light is
turned on when power is
applied.
2. Activate the Liftgate by pushing
ACTIVATED switch 2 times in
one second (FIG. 13-2). Red
ACTIVATED light is turned on
when Liftgate is activated.
POWER
SWITCH
AMBER
LIGHT
ACTIVATE
LIFTGATE
SWITCH
RED LIGHT
ACTIVATE LIFTGATE SWITCH
& INDICATOR LIGHT
FIG. 13-2
NOTE: Liftgate control allows
a 90 second window of
time to operate Liftgate
after pushing the Liftgate
activated switch 2 times.
Each time the toggle
switch is positioned to
UP or DN position, the
operating time is extend
by 90 seconds. After 90
seconds without activity,
the control will become
deactivated.
OPERATING INSTRUCTIONS
To Next Page
Loading...
