EasyManua.ls Logo

Maxon TE-15 - SAFETY INSTRUCTIONS

Maxon TE-15
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
12
PERIODIC MAINTENANCE
PERIODIC MAINTENANCE CHECKLIST - Continued
NOTE: Lube ttings are shown for the cylinder, LH lift arm, and LH parallel
arm. There are also lube ttings at the same places on the RH
cylinder, lift arm, and parallel arm.
LUBRICATION DIAGRAM
FIG. 12-1
RH LIFT ARM &
PARALLEL ARM
CYLINDER
LH LIFT ARM &
PARALLEL ARM
Refer to lubrication diagram (FIG. 12-1) to nd the lube
ttings on cylinders and arms. Pump EP chassis grease
in each lube tting on the cylinders and arms until grease
starts oozing from ends of the bearings. Then, wipe off
excess grease with a clean lint-free cloth.

Other manuals for Maxon TE-15

Related product manuals