11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
22
PERIODIC MAINTENANCE
6. Drive platform hinge pin inboard to
correct position through the platform
hinge bracket (FIG. 22-1). Line up
the hole in the platform hinge pin with
the hole in the pin collar. Reinstall
cap screw through the pin collar and
secure with fl at washer and locknut
(FIG. 22-1).
REPLACING PLATFORM TORSION SPRING - Continued
PIN
COLLAR
FIG. 22-1
CAP
SCREW
FLAT
WASHER
LOCK
NUT
PLATFORM HINGE
BRACKET
PLATFORM
HINGE PIN
To Next Page
Loading...
