17
OPERATION - Continued
RAISING & LOWERING PLATFORM
FIG. 17-1
5. Raise the platform (FIG. 17-1) by pushing the toggle switch to the UP
position (FIG. 17-1A). If loading (or unloading) the platform, wait a
second before releasing the toggle switch, after platform reaches bed
height. To lower the platform, push the toggle switch to the DOWN posi-
tion (FIG. 17-1B).
PLATFORM
NOTE: While operating the Liftgate, release toggle switch to stop the
platform.
UP
DOWN
FIG. 17-1B
FIG. 17-1A
To Next Page
Loading...
