18
6. Load the platform at ground
level as shown in FIG. 18-1.
LOADING PLATFORM AT GROUND LEVEL
FIG. 18-1
7. Raise the platform to bed
height (FIG. 18-2). Move the
load off platform into vehicle
(FIG. 18-2).
UNLOADING PLATFORM AT BED HEIGHT
FIG. 18-2
INBOARD
EDGE
PLATFORM
VEHICLE
BODY
PLATFORM
WARNING
!
A load should never extend past the edges of the platform. Do not
place unstable loads on platform and do not allow load to exceed
the lifting capacity of the Liftgate. If standing on platform, do not
allow your feet to extend beyond the inboard edge of the platform.
To Next Page
Loading...
