Maxon TE-15 - Page 20

20
NOTE: Platform raised off the ground makes it easier to grasp and
foldtheipover.
11.Foldipoverontheplatform
usinghandleontheipover
(FIG. 20-2A). If equipped,
hook the platform to handle
onipover(FIG. 20-2B).
FOLDING FLIPOVER ON PLATFORM
FIG. 20-2
FIG. 20-2A
10. Before moving the vehicle,
prepare the Liftgate as
follows. Make sure load is
removed from platform. If
the platform is at bed height,
push the toggle switch to the
DOWN position as shown in
FIG. 20-1A. Release toggle
switch when platform 2” off
the ground (FIG. 20-1).
PLATFORM 2” OFF THE GROUND
FIG. 20-1
FIG. 20-1A
Never move the vehicle unless the Liftgate is properly stowed.
WARNING
!
FIG. 20-2B