Maxon TE-15 - Page 23

23
CART STOPS OPEN
FIG. 23-1A
2. Open cart stops (FIGS.
23-1A and 23-1B). Next,
position cart and stand in
the footprint area as shown
in FIG. 23-1A.
NOTE: Cart stops are opened by
rotating the hook (FIG.
23-1B).
UNLOADING PLATFORM AT BED LEVEL
(DUAL CART STOPS OPEN)
FIG. 23-2
3. Raise the platform to bed
level (FIG. 23-2). Move the
load off the platform into the
vehicle body (FIG. 23-2).
CART STOPS
OPENING CART STOPS
(RH SIDE OF FLIP OVER)
FIG. 23-1B
ROTATE TO
OPEN
HOOK
VEHICLE
BODY
PLATFORM
USING CART STOPS (IF EQUIPPED) - Continued