EasyManua.ls Logo

MaxPower T Series - 6. Specifications - Physical Characteristics; Physical Specifications

MaxPower T Series
24 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Capacity
1000VA 2000VA 3000VA
Line Normal(Green),Bypass (Amber),Inverter(Green),
Battery Backup (Red),Fault(Red),Overload(Amber),
Load/Battery Capacity (Green ×4pcs ) Site Wiring Fault
LED same as Line Normal LED(115Vac Model Only)
Battery Backup (Every 4 Seconds),Battery Low (Every
Second). Overload (Twice Every Second ),
Fault (Continuously)
Joules
Clamping Rating
Type
Performance
Type
Front Panel LEDs
Fault Message
Audible Alams
TEL/FAX Surge
Suppression
Networking Surge
Suppression
Indicators
54 Joules
395V
RJ11( One Pair ),2C
LAN Surge Suppression
Display by Load / Battery Capacity LED (×5pcs )
RS-232 Signal (Standard)
Windows 95/ 98 /2000/NT /XP, Linux, Novell, Unix,
HTTP
3000Meters max Elevation 0~95%Humidity,
Non-condensing0~40 <45dB (1 meter
from surface )
27.7
Intelligent
Interface
Compatible O/S
Ambient
Operation
Audible noise
Dimension
(W*H*D)ft
Net Weight (lbs)
(With batteries)
Communication
Environment
Physical
* Specifications subject to change without prior notice
* Input voltage range for engineering specifications
* Output voltage and current, please reference UPS specifications label
Specification
- 23-
TVS-1.5KE 6.8A
6.3 x 8.7 x 17.3 7.7 x 13.8 x 18 7.7 x 13.8 x 18
40.7 69.3