MAXTEK 68819 - Manually Setting Time;Date

9
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
enquiries@quesh.co.uk
Instructions
Manually Setting the Time/Date
Press and hold ‘Info/Menu’ button until the screen changes, cycle
through the options with the ‘Tune +/-’ buttons and select ‘System’
by pressing the ‘Select/Snooze’ button. Cycle through the next menu
and select ‘Time’.
Select the ‘Set Time/Date’ time option. You will see the hours ash-
ing rst. Use the ‘Tune +’ Or ‘Tune -’ buttons to the required hour and
press in the ‘Select/Snooze’ button to conrm your selection.
The minutes will be ashing, repeat the process as done for the
hours to set the minutes.
After the time has been set it will cycle through to the date settings.
Repeat the process that you used to set the time to set the required
date. A message will appear on the display when successfully set.
Under the ‘Time’ menu options you can also set the time
automatically by selecting ‘Auto Update’. This will update the date
and time via the DAB signal received by the radio.