MAXTEK 68819 - Auto Tuning FM; Manually Tuning FM

7
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
enquiries@quesh.co.uk
Instructions
Auto Tune FM
To auto tune to the next available radio station press and hold the
‘Tune +’ Or ‘Tune -’ button for 3 seconds. This will start the radio to
auto scan.
The scan will always stop at the next signal received.
Repeat the storing preset procedure to save the current station.
You can change between all stations and strong station for the FM
scan by pressing and holding the ‘Info/Menu’ button and selecting
‘Scan Setting’ with the ‘Tune +’ Or ‘Tune -’ buttons.
Use the ‘Tune +’ Or ‘Tune -’ buttons to select either ‘Strong Stations’
or ‘All Stations’ and press the ‘Select/Snooze’ button to conrm the
required selection. The asterisk in the top right corner indicates
current selection.
You will be sent to the previous menu once a selection has been
made. Press the ‘Info/Menu’ button to return to the main screen.
Manually Tune FM
Use the ‘Tune +’ Or ‘Tune -’ buttons in either direction to tune the
radio in FM mode.
This helps in poor signal areas to get a clear signal.
Repeat the storing preset procedure to save the current station.