3
20 Formatting the Hard Drive
Installing an Additional Storage Drive or
Replacement Boot Drive
(Windows 98, Me, 2000, XP)
This section provides instructions for installing the hard drive in an
existing system as additional storage or as a replacement for a
currently functioning boot drive. Depending on your preference, you
can use the Windows or DOS version of MaxBlast.
1.
Choose one of the following options:
•
From the Windows desktop, insert the MaxBlast CD in the
CD-ROM drive, and choose to install the MaxBlast soft-
ware for Windows.
•
Boot your system from the MaxBlast CD and choose
Setup Your Hard Disk.
You may need to change your BIOS
settings to boot from the CD. See page 16 for details.
2.
When the MaxBlast program starts, follow the on-screen prompts
to step through the installation process
.
Choose whether to install
the drive as additional storage or as a new boot drive.
3.
Depending on your selection, do one of the following:
a.
Additional storage install: After the drive has been set up
as additional storage, double-click the My Computer icon.
A new drive letter and icon should appear.
To Next Page
Loading...
Need help?
General
