MaxxMar Cool Motion - User Manual

New Generation Maxx Motors
Cool Motion, Domlux, HWM-10, HWM-20
Operation & Programming Instructions
Command
Key Combination
Description
Illustration
Go Up
Press UP
Move all the way to the upper
limit
1
Press LEFT
Press DOWN
Press STOP
Move all the way to the lower
limit
1
Stop ongoing motion
Press RIGHT
Hold LEFT
for 2 seconds
Hold RIGHT
for 2 seconds
Press
CHANNEL
Move the motor up in a small
increments
Move the motor up in a small
increments
Move the motor to favourite
position number 1.
Basic Operation - 1 and 5 Channel Remote Controls
Go Down
Stop
Step Up
Step Down
Go to Favourite
Position #1
Go to Favourite
Position #2
Next
Channel
2
Move the motor to favourite
position number 2.
Cycle to the next channel (or
group of channels) on the
remote, making it active.
1. The motor will stop on button release if the limit is not yet set.
2. This command is not sent to the motor, and affects only the remote control on which it is executed.
Note:
Unless noted, all commands are sent
from a remote control to a motor, and
will only have effect if the remote
control's active channel has been
paired with the desired motor.
1and 5 Channel Remote Control Specifications
(Models: RC-215, RC-230)
Transmission power: 10dBm
ASK 433.92MHz wireless transmission
Outdoor transmission distance: 200m
Indoor transmission distance: 35m
Working temperature: -20°C- +55°C
Battery model: CR2450

Summary

1 and 5 Channel Remote Control Specifications

Basic Operation - 1 and 5 Channel Remote Controls

Learn basic commands like Go Up, Go Down, and Stop.

Setting Motor Limits

Upper Limit Setting

Procedure to set the motor's upper rotational limit.

Lower Limit Setting

Procedure to set the motor's lower rotational limit.

Setting Favourite Positions

15 and 30 Channel Remote Control Specifications

Basic Operation - 15 and 30 Channel Remote Controls

Learn basic commands for 15/30 channel remotes.

Troubleshooting Remote Controls

Solar Panel Operation and Guidelines

MaxxLink Smart Controller Setup

Bluetooth Blind Control Setup

Solo-A1 Rechargeable Wand Control

Basic Operation

Fundamental commands for the Solo-A1 wand control.

Motor Limit and Direction Settings

Wand Control Favourite Positions

General Motor Troubleshooting

MaxxLink Connectivity Troubleshooting

Bluetooth Connectivity Troubleshooting

Original Solo-A1 Motor Operation

Motor Unit Assembly and Charging

Instructions for assembling the motor unit and charging the battery.

Setting Motor Limits and Rotation

Procedures for setting lower limits and changing motor rotation.

Upper Limit Setting and Modes

Domlux & Cool Motion Motor Operation

Specifications and Basic Operation

Overview of motor specs and initial setup procedures.

Advanced Motor Settings and Management

MaxxLink Automation Integration

Solar Panel and Window Guidelines

MaxxMar Cool Motion Specifications