57
6 TROUBLE SHOOTING
The Mayo Conveyor uses a straight or telescoping deisgn to convey potatoes. It is a simple and reliable sys-
tem that requires minimum maintenance.
In the following section, we have listed many of the problems, causes and solutions to the problems that you
may encounter.
If you encounter a problem that is difficult to solve, even after having read through this trouble shooting sec-
tion, please contact your local Mayo dealer or the factory. Before you call, please have this Operator’s Manual
from your machine ready.
PROBLEM CAUSE SOLUTION
System won't run. No power. Turn power ON at master panel.
Tripped motor starter. Reset motor starter (See Section 5.2.3).
Conveyor won't run. No power. Turn conveyor ON.
Sheared motor key. Replace key.
Sheared reducer key. Replace key.
Binding. Align conveyor.
To Next Page
Loading...