To Next PageTo Next PageHow to fix a Maytag AER4111AA Ranges surface element that does not heat up?
If the surface element on your Maytag Ranges doesn't heat, start by checking the element for continuity and replace it if it has failed. Then, verify all wire connections are clean and tight, replacing any broken wiring. A failed infinite switch could also be the problem, so check it and replace it if necessary.
What to do if the Maytag AER4111AA Ranges oven door will not unlock?
If the Maytag Ranges oven door will not unlock, allow the self-cleaning cycle to complete, if it is running. The door will not unlock until the unit has cooled to a safe temperature. Do not force the door open, as this will void the warranty. To quicken the cooling process, blow cool air on the door latch area.
What to do if the self-clean cycle is not working on my Maytag AER4111AA Ranges?
If your Maytag Ranges self-clean cycle isn't working, try shutting off power to the oven for five minutes by switching off the circuit breaker. Then, reset the circuit breaker and try the oven again.
What to do if my Maytag AER4111AA Ranges oven is not operating?
If your Maytag Ranges oven isn't operating, first, try shutting off power to the oven for five minutes by switching the circuit breaker off, then reset it and try again. Also, verify that the circuit breaker is not tripped and ensure power is present at the unit. Replace the household fuse, being careful not to exceed fuse capacity. A programming error could also be the cause; in which case, shutting off the power and resetting the circuit breaker may resolve the issue.
How to troubleshoot a Maytag AER4111AA oven light that does not operate?
If your Maytag Ranges oven light does not operate, first check the lamp and replace it if necessary. Also, check for broken, loose, or dirty wire connections. Finally, check the light socket for continuity.
Why are the clock and timer not working on my Maytag AER4111AA Ranges?
If the clock and timer on your Maytag Ranges are not working, verify that power is present at the unit and that the circuit breaker is not tripped. Replace the household fuse, but do not exceed fuse capacity.
Why does my Maytag AER4111AA oven smoke or have an odor during the first few uses?
Minor smoking or odor is normal the first few times you use your Maytag Ranges oven. Ventilate the area well and perform a self-clean cycle.
How to fix a Maytag AER4111AA Ranges with no bake element operation?
If the bake element in your Maytag Ranges is not working, check the element for continuity and replace it if it has failed. Also, verify all wire connections are clean and tight, and replace any broken wires.
How to fix a Maytag AER4111AA with no broil element operation?
If the broil element in your Maytag Ranges is not working, check the element for continuity and replace it if it has failed. Also, verify all wire connections are clean and tight, and replace any broken wires.
Why is the surface element cycling frequently on my Maytag AER4111AA?
The element cycles to maintain proper heat and to prevent damage to the smoothtop on your Maytag Ranges.
General