Maytag MDE9700A - Disassembly Procedures; Dryer Door Reversal and Removal

16 16025911 Rev. 0 ©2005 Maytag Services
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
Disassembly Procedures
WARNING
!
Door Reversal/Disassembly
1. Disconnect power supply to unit.
2. Remove four screws and Door Strike.
3. Remove two screws attaching Door Hinge.
4. Install Door and Strike on opposite sides or continue
with Door disassembly.
5. Remove screws around perimeter of Door Inner
Panel.
6. Remove Inner Panel.
7. Remove Gasket.