EasyManua.ls Logo

Maytag MVWB835DC - User Manual

Maytag MVWB835DC
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
W11040359A
W11040360A-SP
Designed to use only
HE High Efficiency detergents.
Conçue pour l’utilisation d’un
détergent haute efficacité seulement.
If you have any problems or questions, visit us at www.maytag.com
Pour tout problème ou tout question, consulter www.maytag.ca
Use & Care Guide
Guide d’utilisation et d’entretien
Top-Loading High Efficiency Low-Water Washer
Laveuse haute efficacité à faible consommation
d’eau avec chargement par le dessus
Para obtener acceso
al Manual de uso y
cuidado en español, o para
obtener información adicional
acerca de su producto, visite:
www.maytag.com.

Questions and Answers

  • E
    ewarrenSep 9, 2025
    Why are the wash or rinse temperatures incorrect on my Maytag Washer?
    • W
      wrightheatherSep 9, 2025
      If you're experiencing incorrect wash or rinse temperatures with your Maytag Washer, make sure the hot and cold inlet hoses are not reversed. Both hoses must be attached to both the washer and faucet, ensuring hot and cold water flow to the inlet valve. Also, check that the inlet valve screens are not clogged and remove any kinks in the hoses.
  • W
    wlynchSep 8, 2025
    What to do if my Maytag MVWB835DC Washer is rocking?
    • N
      Nathan JuarezSep 8, 2025
      To resolve rocking or “walking” with your Maytag Washer, make sure that its feet are making complete contact with the floor and are locked. Leveling the washer is crucial for proper operation.
  • A
    Angela BeckerAug 22, 2025
    What to do if my Maytag MVWB835DC Washer is leaking water?
    • A
      Andrea HarrisonAug 22, 2025
      If your Maytag washer is leaking water, several factors could be responsible. Ensure the washer is level, as water may splash if it is not. Check that the fill hoses are tightly connected and that all four fill hose flat washers are properly seated. Also, verify the drain hose connection and make sure it is properly secured to the drainpipe or laundry tub. Inspect household plumbing for leaks or clogs and avoid placing tape over the drain opening. Unbalanced loading can also cause leaks.
  • B
    Brandon RoachSep 5, 2025
    Why does my Maytag MVWB835DC make a whirring sound?
    • J
      Jessica BrownSep 5, 2025
      The whirring sound you hear in your Maytag washer is the sound of the basket decelerating, which is normal.
  • M
    Mr. Samuel NelsonSep 4, 2025
    Why does my Maytag MVWB835DC Washer make a humming sound?
    • S
      Savannah HobbsSep 4, 2025
      The humming sound you hear in your Maytag washer may be due to load sensing. It is normal to hear the hum of the sensing spins after you have started the washer.
  • R
    riddlevictoriaSep 3, 2025
    Why does my Maytag MVWB835DC make a gurgling or humming sound?
    • H
      haynestinaSep 3, 2025
      A gurgling or humming sound in your Maytag washer is normal when the washer is draining water. The pump makes a continuous humming sound with periodic gurgling or surging as final amounts of water are removed during the spin/drain cycles.
  • B
    bentonmarkSep 1, 2025
    Why does my Maytag MVWB835DC make clicking or metallic noises?
    • J
      Judy DuncanSep 1, 2025
      Clicking or metallic noises in your Maytag washer can occur if objects are caught in the washer drain system. Always empty pockets before washing, as loose items like coins can fall between the basket and tub or block the pump. It is also normal to hear metal items on clothing, such as snaps, buckles, or zippers, touch the stainless steel basket.
  • K
    kcarrollAug 31, 2025
    Why is my Maytag MVWB835DC Washer not performing as expected?
    • C
      Caleb ReedAug 31, 2025
      If your Maytag washer isn't performing as expected, several factors could be the cause. It is normal for the load not to be completely covered in water due to the HE low-water operation. Ensure both hoses are attached and have water flowing to the inlet valve and that both hot and cold water faucets are turned on. Check for any kinks in the inlet hoses or clogs in the inlet valve screens. Make sure you are using HE detergent and not using too much of it. Also, the lid must be closed for the washer to run, and the washer will pause during certain phases of the cycle.
  • H
    Holly SullivanAug 30, 2025
    Why is my Maytag MVWB835DC not cleaning or removing stains properly?
    • S
      Sarah FlynnAug 30, 2025
      If your Maytag Washer is not cleaning or removing stains effectively, it may be because the washer senses the load size and adds the correct amount of water, which may not fully cover the wash load. Avoid adding more water, as this can lift the laundry off the washplate and reduce cleaning effectiveness. Ensure the washer is not loaded too tightly and add detergent, Oxi products, and color-safe bleach to the bottom of the basket before adding the load items. Wash like colors together and promptly remove them after the cycle to prevent dye transfer. Ensure you are using HE detergent and the correct cycle for the fabric type.
  • H
    Hailey ShepherdAug 29, 2025
    Why is my Maytag MVWB835DC Washer making clicking or metallic noises?
    • S
      Samantha HurstAug 29, 2025
      If you hear clicking or metallic noises from your Maytag Washer, objects may be caught in the washer drain system. Empty pockets before washing, as loose items like coins could fall between the basket and tub or block the pump. It may be necessary to call for service to remove the items. It is also normal to hear metal items on clothing, such as metal snaps, buckles, or zippers, touch against the stainless steel basket.

Maytag MVWB835DC Specifications

General IconGeneral
BrandMaytag
ModelMVWB835DC
CategoryWasher
LanguageEnglish

Related product manuals