Maytronics Dolphin CLASSIC 13 - Remove the Pool Cleaner from the Water

7
CLASSIC 13 / CLASSIC 13+ | User Instructions
Using the blue cable, bring the Pool Cleaner to the pool edge.
Use the handle to remove the Pool Cleaner from the pool.
Place the Pool Cleaner on the edge of the pool to let the water drain out.
5.4.3
5.4.2
5.4 Remove the Pool Cleaner from the Water
5.4.1
Turn OFF the power supply.
Please use the cable to pull the robot to the surface, then use the handle.
WARNING
WARNING