3
English
C. Laying out the cable
Unwind minimal required cable to cover the entire pool size, straight the cable along the pool side.
Make sure there are no twists or kinks.
Part 2 - Into the water
Place the robot pool cleaner
into the pool and release the handle.
Note: When using the combined brushes or Wonder brushes, gently squeeze the Wonder brush material until it is totally wet.
Only use the original supplied Power supply Unit.
The Power supply Unit is Splash proof – Do not immerse it in water.
Unplug the Power Supply Unit before any servicing activity.
Do not plug the Power Supply Unit in before placing the pool cleaner in the water.
Ensure the mains outlet is protected by a ground fault interrupter (GFI) or an earth leakage interrupter (ELI).
Important: DO NOT enter the swimming pool while the pool cleaner is working.
3 Meters
10 feet
Swivel
To Next Page
Loading...
Need help?
General
