Mazda Connect Owner's Manual

(If Android Auto™ cannot be connected)
When the message, “Mobile Device Error”, is displayed and Android Auto™ cannot
be connected
Make sure that the Android™ Smartphone in question is compatible with Android Auto™.
Before trying to reconnect your Android™ Smartphone to the connector cord, do the
Bluetooth
®
device pairing again.
(If Android Auto™ cannot launch)
Some Android™ Smartphones are connected in charging only mode when connected with
the connector cord.
In this case, it may not be possible to use Android Auto™, therefore, change the USB
setting for the Smartphone from charging only mode to transmission enabled mode.
Additionally, if Apple CarPlay™ is being used, disconnect Apple CarPlay™ because
Android Auto™ may also be unusable.
If Android Auto™ still cannot launch, switch off the Android Auto™ connection setting
once, and then switch it back on while connected in USB mode.
The Android Auto™ connection setting can be changed in the
tab on the Settings
screen (page 2-62).
Convenience
Android Auto™
3-11
CX-3_8JT6-EA-20G_Edition1_old 2020-5-27 11:57:54

Mazda Connect Specifications

General

Rotary Dial Control	Yes
Voice Control	Yes
Steering Wheel Controls	Yes
Display Type	LCD
Touchscreen	Yes
Connectivity	Bluetooth
Auxiliary Input	Yes
Navigation	Available
Apple CarPlay	Yes
Android Auto	Yes
HD Radio	Available
SiriusXM	Available
Display Size	7-inch or 8.8-inch
Wi-Fi Hotspot	No (typically requires a separate subscription/device)