Safety Equipment
Setting change method
1. Select on the home screen and display the setting screen.
2. Switch the tab to [Safety] and select the setting item you want to change.
Function and how it can be changed (underlined item is initial setting)
Advanced Smart City Brake Support (Advanced SCBS)
Smart Brake Support (SBS)
The system can be changed so that Advanced Smart City
Brake Support (Advanced SCBS)/Smart Brake Support
(SBS) does not operate.
*1
On/Off
The distance at which the collision warning activates can be
changed.
Far/Med./Near
The volume of the collision warning can be changed. High/Low/Off
Smart City Brake Support (SCBS)
The system can be changed so that Smart City Brake Sup‐
port (SCBS) does not operate.
*1
On/Off
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS)
The system can be changed so that the steering wheel assist
does not operate.
On/Off
The sensitivity of the warning for the Lane-keep Assist Sys‐
tem (LAS) & Lane Departure Warning System (LDWS) can
be changed.
High/Low
When the steering
wheel operation as‐
sistance is turned on
The system can be changed so that
the Lane Departure Warning does not
activate.
On/Off
When the steering
wheel operation as‐
sistance is turned off
The warning timing in which the sys‐
tem determines that the vehicle may
be deviating from its lane can be
changed.
At/Before
The sensitivity of the warning for the
system can be changed.
Often/Rare
The type of Lane-keep Assist System (LAS) & Lane Depar‐
ture Warning System (LDWS) warning can be changed.
Vibration/Beep/Rumbl.
The warning intensi‐
ty/volume of the sys‐
tem can be changed.
Vibration High/Low
Rumbl. High/Mid/Low
Beep High/Low
Blind Spot Monitoring (BSM)
The system can be changed so that Blind Spot Monitoring
(BSM) does not operate.
*1
On/Off
Warning beep volume
*2
High/Low/Off
Features
Settings
2-58
CX-3_8JT6-EA-20G_Edition1_old 2020-5-27 11:57:54
To Next Page
Loading...
Need help?
General
