Function and how it can be changed (underlined item is initial setting)
Distance Recognition Support System (DRSS)
The system can be changed so that Distance Recognition
Support System (DRSS) does not operate.
*1
On/Off
The distance at which the vehicle ahead and your vehicle in‐
dicated in the display flashes in white can be changed.
Far/Med./Near
Traffic Sign Recognition System (TSR)
*3
The Traffic Sign Recognition System (TSR) can be set to
inoperable.
*1
On/Off
The warning pattern of the excessive speed warning can be
changed.
Off/Visual/Audio & Visual
The activation timing for the excessive speed warning can
be changed.
+0 km/h (+0 mph)/+5 km/h (+5 mph)/+10 km/h
(+10 mph)
360°View Monitor
Setting can be changed so that the 360° view monitor is au‐
tomatically displayed when the ignition is switched to ON.
On/Off
Setting can be changed so that the display of the estimated
forward line of progress is not displayed.
On/Off
Setting can be changed so that the top view/front view dis‐
played while the vehicle is moving in the forward direction
after reversing is not displayed.
On/Off
Parking sensor system
Display
*4
/non-display
On/Off
*
1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda
recommends that these systems remain On.
*
2 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.
*
3 This system functions only when the navigation system is functioning.
*
4 When the ultrasonic sensors detect an obstruction, the contents indicated on the center display switches to the
360°View Monitor.
Features
Settings
2-59
CX-3_8JT6-EA-20G_Edition1_old 2020-5-27 11:57:54
To Next Page
Loading...
Need help?
General
