Mazda Connect - Page 38

NOTE

The remaining amount of power in the M Hybrid battery is indicated at 6
levels.

Charging of the M Hybrid battery is controlled automatically by M Hybrid. The
remaining power in the M Hybrid battery may not reach the maximum even
though power is regenerated by the engine power and deceleration
regeneration. However, this does not indicate a problem.
7. Displays the cylinder indication in white while fuel is not injected to the engine.
When fuel is injected to the engine, the color changes to red and then to dark
green as fuel is burnt eciently. In addition, while fuel is burnt eciently, SPCCI
is indicated on the display. (SPCCI ＝ Spark Controlled Compression Ignition)
8. Displays the readiness status as to whether operation of the i-stop function is
available.
9. Displays the operation readiness status of the i-stop function using icons (engine,
battery, and air conditioner). Icons which indicate that a system's operation
readiness has been completed are illuminated. Icons which have not been
illuminated indicate that the system's operation readiness has not been
completed.
10.Indicates the operations required by the driver to operate the i-stop function
while it is not operating.
11.Displays the current amount of time that the i-stop function has been operating
and the accumulated amount of time that it has been operating.
*
1 The indication may
dier
depending on the driving conditions.
Features
Information
2-6
Mazda Connect_8JB9-EA19E_Edition1_new 2019-8-1 17:07:41